Beschreibung

Professional Acrylic Plexiglass Sheet Cutter Scoring Knife Tool,With a Curved Handle,It Is More Convenient To handle,11 This acrylic hook knife tool is specially used to cut acrylic sheets or other plastic sheets. Acrylic sheets or other plastic sheets are hard and brittle, so it is difficult to divide. This hook knife can help you carve a thin groove on the acrylic sheet, and then you can break the acrylic sheet along the groove. mark the board with a pen,then use a ruler to place it according to the the hook knife to draw a groove on the acrylic plate along the ruler,and the ruler must be pressed with your left hand. Hold the hook knife with right hand and repeat the operation to make the groove deep enough. is a ridge-like protrusion on the back of the hook knife. Place the hook knife under the acrylic board, align the protrusion of the hook knife with the groove just hooked out,and press down on both sides of the groove with both hands,Let a small part of the acrylic board split along the break the acrylic board along the groove. When using the hook knife,pay attention to protect the tip of the knife and do not touch the ground. If the tip of the knife is not sharp, you can change the blade.Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total. If you are not familiar with the usage of this tool, it is recommended that you carefully read the above instructions on how to use it, as well as the cutting demonstration video. Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total. Correct Use of Acrylic Cutting Knife When cutting acrylic, use the lower tip of the blade to Scoring the acrylic, not the entire edge of the blade, and prepare a ruler that is thick, wide, and long enough.

Professional Acrylic Plexiglass Sheet Cutter Scoring Knife Tool,With a Curved Handle,It Is More Convenient To handle,11 This acrylic hook knife tool is specially used to cut acrylic sheets or other plastic sheets. Acrylic sheets or other plastic sheets are hard and brittle, so it is difficult to divide.

Zustand

Neu

Blade Material

High Carbon Steel

Unit Count

1.0 Count

Included Components

Hook Knife And A Box Of Blades

Farbe

Yellow

Material Type

High Carbon Steel, Plastic

Material

High Carbon Steel, Plastic

Länge

5.98 Inches

Abholung oder Versand